Berkey Fluoride Filter Tests and Media Spec Details

Last updated: November 21, 2026 Dan DeBaun By Dan DeBaun
Berkey Fluoride Filter Tests and Media Spec Details

The following fluoride media specs were provided by the Berkey manufacturer (New Millennium Concepts) and the supplier of the PF-2 fluoride and arsenic media on 4/8/2013. The intent is to provide additional details for customers who want more detailed data.

PRODUCT INFORMATION:

The Proprietary Fluoride Reduction Media is a new and improved high yield aluminum oxide especially formulated for the removal of Fluoride and arsenic from drinking water. This media has an unusually high surface area of more than 350 sq.m./gram of material which allows more efficient removal of the Fluoride and arsenic ions. This high surface area is enhanced by controlled development of the pore size distribution from 30 Angstroms to 100 Angstroms, providing greater accessibility to the surface active sites through bulk diffusion.

Uniform particle size low silica content and high purity, is characteristic of the new and improved Proprietary Fluoride Reduction Media which insures effective operation in the reduction of Fluoride. The extremely low silica content significantly reduces the tendency of the silica to form silicone tetra fluoride which reacts with both the media and the pipes leading to clogging and corrosion problems.

PRODUCT APPLICATION:

The media is activated alumina (aluminum oxide). Activated alumina is one of two treatment methods the EPA names as best available technology for reducing fluoride in public drinking water. The other is reverse osmosis. This product can be used in various filtration products and can also be packed in large columns for high volume applications including drinking water treatment plants and waste treatment plants. The Proprietary Fluoride Reduction Media can also be used in various applications where defluorination is necessary.

For maximum removal efficiency, maintain the water being treated between a PH level of 5-7. PF-2 filters are not designed to be regenerated at home. Replace each set after 1,000 gallons or one year, whichever comes first.

TYPICAL PHYSICAL PROPERTIES OF PROPRIETARY FLUORIDE REDUCTION MEDIA:

Surface Area, sq. m/g.: 350 Total Pore volume, cc./g.: .55 Aluminum Oxide XRD Phase: Chi, Gamma, Amorphous Crush Strength, lbs (kg): 30 (14) Abrasion Loss wt%: 0.1 Bulk Density, lbs/cu. ft (kg/cu. m): 47 (750)

TYPICAL CHEMICAL PROPERTIES OF PROPRIETARY FLUORIDE REDUCTION MEDIA:

Wt % AL2O3 95.1 SiO2 0.02 Fe2O3 0.02 Na2O 0.30

GENERAL INFORMATION:

The Proprietary Fluoride Reduction Media has been specially prepared to optimize the media for more efficient removal of the Fluoride ion. Testing of the material is important for each application as influent water PH, quality and purity of the water and various metal ion concentrations are all variables which influence the effectiveness of the media. Note that the material is most efficient between a PH of 5 and 7.

Testing for fluoride removal was based on 20-30 ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot (25kg) of media. Results of < 1 ppm of the fluoride ion in the effluent were typical for the media. Under optimum conditions, effluent concentrations of less than 50 ppb of Fluoride ion were found to be readily achieved. Results may vary significantly with each particular application.

OTHER INFORMATION:

  1. Calcium & Sodium Fluoride. Once dissolved in water, fluoride salts release fluoride as a negatively charged ion, and that ion is what the media adsorbs. So the media targets the fluoride ion itself, whichever salt it came from.
  2. Hydrofluorosilicic Acid (HFS). Hydrofluorosilicic acid is the additive most US water systems use for fluoridation. At the low levels used in drinking water it breaks down almost completely into fluoride ions, which is what the media is designed to adsorb. The supplier has not published test data on this acid specifically.

NMCL obtains its Proprietary Fluoride Reduction Media from a third party USA manufacturer that specializes in media that targets difficult to remove contaminates, such as Fluoride and Arsenic. The above information provided has been extracted from the supplier’s data sheets and other written communications.

Dan DeBaun

Dan DeBaun

Dan is the owner and operator of Big Berkey Water Filters. Prior to Berkey, Dan was an asset manager for a major telecommunications company. He graduated from Rutgers with an undergraduate degree in industrial engineering, followed by an MBA in finance from Rutgers as well. Dan enjoys biohacking, exercising, meditation, beach life, and spending time with family and friends.


Trust the largest authorized US Berkey dealer on water filtration? Make us your Preferred Source on Google.