Sport Berkey Replacement Filter
Sport Berkey Replacement Filter
Keep your Sport Berkey performing at peak efficiency. Replace your filter when capacity is reached or flow rate decreases—easy drop-in replacement, same powerful filtration.
What This Filter Removes
Designed for portable filtration anywhere—from municipal water fountains to questionable foreign water supplies. Removes health-threatening contaminants at >99.9% efficiency.
💧 Chlorine & Disinfectants
- Chlorine
- Trihalomethanes (THMs)
- Foul tastes and odors
🧪 VOCs & Chemicals
- Volatile Organic Compounds
- Detergents
- Pesticides
☢️ Radiologicals
- Radon 222
- Other radiological contaminants
🌫️ Particulates
- Cloudiness
- Silt and sediment
- Turbidity
How to Replace Your Filter
🔄 Simple Drop-In Replacement
Replacing your Sport Berkey filter takes less than 2 minutes. No tools required—just unscrew the cap, swap the filter, and you're ready to go.
- Unscrew the Sport Berkey cap from the bottle
- Remove the old filter from the cap assembly
- Insert the new replacement filter into the cap
- Fill bottle with water and fasten cap tightly
- Activate filter by pulling down the lever to expose the straw
- Squeeze bottle twice to flush any manufacturing residue
- Rinse bottle and cap—your Sport Berkey is ready to use!
Filter Storage & Maintenance
📦 Long-Term Storage Instructions
If your Sport Berkey will not be used for an extended period, flush the filter with a chlorinated solution (1/4 tsp. chlorine per half-gallon of water). Allow the unit to dry thoroughly with the cap removed. Once completely dry, re-assemble and store in a clean, dry location.
When to Replace: Replace the filter when you've reached capacity (160 or 640 refills depending on water source) or when flow rate noticeably decreases. For best performance and safety, track your refills and replace on schedule.
- Choosing a selection results in a full page refresh.
- Opens in a new window.




